Maglite Blister 6D Cell Flashlight Black

Product Information

Multi-mode electronic switch with 5 available modes: Momentary, Full Power, Low Power, Eco Mode and Strobe This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items. To return faulty items see our Returning Faulty Items policy.

Are you a fan of established classics? No product composed of plastic parts, but aluminum and perfect run time? To set the turbo timer: rapidly tap the switch 8 times, the light will then enter the programming mode and begin to flash. With the light in programming mode, tap the switch 30 times to enter the turbo timer set mode. The light will then switch to 100% power. When the light is at the desired temperature for the turbo step down, turn the light off. The turbo timer will then be set. The turbo timer steps the light down to 50% regardless of the mode group set.The bulb is a s imple 3 mode Low, Medium, High with memory by default, however its easily customized for those who like a taste of something different.

DrJones Guppy2drv. This firmware allows the ultimate in user customizability, with 24 built-in mode groups, that the user can select via a series of button presses and the option of user programmable turbo timer that will automatically step the power down to 50% after the set time is hit (see below for instructions). The optional glass lens is hardened glass that is more resistant to breaking and scratching than traditional glass. A scratch free lens will have better light transmittance and is easy to clean. Upgrade your existing Maglite® with a high output LED lamp that will also help you save money on batteries and standard bulb replacement costs.Runtime with medium power mode is approximately 12 hours with 4D cells. Power consumption of approximately 3 watts producing approximately 350 lumens A standard incandescent lamp lasts around 20 hours and needs to be replaced. In contrast our LED lamp has a life of around 20,000 hours whilst maintaining its bright white light output.

We can immediately disregard the Nebo and the Coast HP17 due to their low runtime, although notably the Nebo is the only torch here with an IPX7 water proof rating. All the others boast relatively high brightness levels for very long runtimes. The LED Lenser & Walther Pro XL1000 both have higher outputs than the Maglite ML300L, and excellent variable beams. But the LED Lenser is smaller and notably lighter than the Walther Pro, winning it a top spot. It is designed with a solid polished metal reflector and heat sinking to allow for improved optics and heat dissapation. This bulb will transform your Maglite into a ultra high performance, reliable, energy efficient torch making it the perfect choice for professionals. All 6 of these torches are excellent choices, depending on your specific requirements. But to my mind, 2 are better.Here we’re looking at the latest version of Maglite’s 3 x D-Cell torch, a decades long staple of home owners and New York cops alike, alongside 3 competitors plus the smaller, lighter 3 x C-cell Maglite ML50L and a newer, brighter torch based on rechargeable batteries. How we judge Exchanging the lamp / bulb requires no tools and is very easy, the new LED simply replaces the existing lamp. The light produced will only dim near the end of the batteries' lifetime. It only gradually fades, not a sudden drop out of light

Longer battery life results from the circuit built into the unit which completely utilizes the power from the batteries, whilst maintaining constant light output. This bulb is for use with the voltage of 6D cells ONLY, not more or less (NIMH are best). However if you want power it with other cells such as a pair of 26650s a 2D to 2x26650 kit is available in the shop. This video shows how to install it. If you want to use the 2x26650 kit in a larger mag than 2D just get the 2D kit and add dummy D cells in before you install the battery sleeve. Example a 4D light would need 2 dummy D cells and the 2x 26650 body kit. https://lumencraft.com/-diy-parts/35-dummy-c-an-d-cell-batteries.htmlRuntime with high power mode is approximately 5 hours with 4 D cells. Power use of approximately 9 watts producing approximately 1200 lumens. This LED lamp does not fade when hot and maintains its bright white, unlike other similar lamps on the market, for much longer. A standard incandescent bulb will drop its light output by ~ 50% output after an hour. The constant current control circuit built into the LED lamp will ensure that light output levels will be maximised over the full life of your batteries – up to 30 hours continuous use on 6 x D cells. Easy to fit, just a matter of replacing the original reflector and bulb with the high power LED upgrade Brilliant 220 lumens output, the brightest single LED replacement on the market for your 6 x D Cell Maglite. This lamp is significantly brighter than the incandescent bulb it replaces and will dramatically extend your battery life.